稱重式螺桿充填包裝機

稱重式螺桿充填包裝機簡要說明 Descriptive Abstract

該機主要針對容易揚塵的的超細粉末及高精度的包裝要求而開發設計，根據裝在容器下面的重量傳感器給出的信號完成雙速充填、計量及升降等工作，適用于包裝添加劑、碳粉、滅火器干粉、其它超細粉末、及有高精度包裝要求的粉末等。

This model is designed mainly for the fine powder which easily to spout dust and high-accuracy packing requirement. Based on the feedback signal given by below sensor, this machine do measuring, two-filling, and up-down work, etc. It is specially suitable for filling additives, carbon powder, dry powder of fire extinguisher, and other fine powder which needs high packing accuracy.

 

稱重式螺桿充填包裝機主要特征

1、氣動夾袋裝置和托架裝在重量傳感器上，根據預先設定的重量進行快速和慢速充填，高反應速度的稱重系統，保證高包裝精度；

2、伺服馬達帶動托盤升降，升降速度可任意設定，充填時基本上無粉塵揚出污染環境；

3、伺服馬達及伺服驅動控制螺桿，性能穩定、精度高；

4、PLC控制、觸摸屏人機界面顯示，操作簡便；

5、全不銹鋼結構；組合式或開啟式料箱，清洗十分方便；

6、充填頭配有手輪調整高度，輕松實現多種規格包裝；

7、 固定式螺桿安裝結構，充填時不會影響物料性質；

8、工作流程：人工套袋或人工放罐→容器升高→快速充填，同時容器下降→重量達到預量值→慢速充填→重量達到目標值→人工取出容器；

9、氣動夾袋裝置和托罐裝置可供選擇，只需選擇不同裝置，即可滿足罐裝和袋裝要求；

10、兩種工作方式可切換，定量式或?qū)崟r(shí)稱重式，定量式速度快，精度稍差，實時稱重式，精度高，速度稍慢。

 

Main Features

1.Pneumatic bag clamper and platform equip with load cell to handle two speeds filling as per preset weight. Featured with high speed and accuracy weighing system.

3.Servo motor does up-down work driving with tray together, the updown rate can be set randomly, no dust spouts out when filling.

3.With servo motor and servo drive controlled auger, perform stably, and with high accuracy.

4.PLC control, touch screen display, easy to operate.

5.Made of stainless steel, combined hopper or split hopper,easily to be cleaned.

6.With handwheel to adjust the height, easy to many kinds of weight.

7.With fixed screw installation, the material quality won't be effected.

8.Process:put bag/can(container) on the machine → container raise → fast filling, container declines → weight reaches the pre-set number → slow filling → weight reaches the goal number → take the container away manually.

9.Note: the pneumatic bag-clamp equipment and can-hold set isoptional, they are suitable for can of bag filling separately.

10.Two filling modes can be inter-changeable, fill by volume or fill byweight. Fill by volume featured with high speed but low accuracy. Fill by weight featured with high accuracy but low speed.

 稱重式螺桿充填包裝機主要參數

型號/Mode	YQ-PF-B11	YQ-PF-B12
包裝重量/Packing Weight	100g-10kg	1kg~50kg
包裝精度/Packing Weight	100~1000g,,≦±2g;≧	1~20kg,≦±0.1~0.2%,>20kg≦±0.05~0.1%
充填速度/Filling Speed	5~20次/分鐘 50~20	2~8次/分鐘 2~8 time per min
電源/Power Supply	3P AC208~415V	3P AC208~415V 50/60Hz
壓縮空氣/Air Supply	6Kg/cm2  0.1m3/min	6Kg/c 0.1m /min m2
整機功率/Total Power	3.0Kw	3.0Kw
整機重量/Total Weight	350kg	500kg
整機體積/Overall Dimensions	1135*890*2500mm	1125*975*3230mm
料箱容積/Hopper Volume	70L	100L

主要參數 Main Technical Data